Diagnosing and Troubleshooting Your Hayward Aqua Rite System

Aquarite 900 Inspect Cell. AquaRite 900 Salt Chlorinator Verify the TurboCell model (located on the label the wraps around the body) then compare it to what is programmed in the system View and Download Hayward AquaRite 900 Series owner's manual online

However, the T-Cell-3, T-Cell-5, and T-Cell-9 are only compatible with software revision level 1.5 or above To check which level you have, refer to the diagnostic display order above — the software revision level is number 7 on the list, so press the diagnostic.

AquaRite 900 Salt Chlorinator

I have tried to reset the salt cell countless times, but the instant reading and resetting only goes as high as 1100. Symptoms of a bad thermistor in AquaRite include no power, chlorinating light not working, and no power to the salt cell I have tried to reset the salt cell countless times, but the instant reading and resetting only goes as high as 1100.

Hayward Aquarite 900 with 40k gal extended life turbo cell Pool. Verify the TurboCell model (located on the label the wraps around the body) then compare it to what is programmed in the system If the pool has the proper amount of salt and the "Inspect Cell" LED is still illuminated, the cell may be worn and need replacement

Cellule Aquarite Turbo CELL 150m3 (HAYWARD) Electrolyseur AQUARITE Pro. If the pool has the proper amount of salt and the "Inspect Cell" LED is on, you can manually reset the Inspect Cell LED by pressing and holding the diagnostic button for 3 to 5 seconds If Inspect Cell LED is ˜ashing & salt level is above 2700ppm, 500hr cell countdown timer is active Inspect Cell, once clean, hold down Diagnostic.